manualshive.com logo in svg

Roland VersaUv LEF - 12i, Руководство пользователя

Поделиться
Скачать
Roland VersaUv LEF - 12i Скачать руководство пользователя страница 34

32

Chapter 2 Fully Utilizing the Machine

Chapter 2 Fully Utilizing the Machine

Fully Utilizing the Preset Function

Saving Current Media Setup with a Different Name

Procedure

Set up the media (height position, print area) and make sure [SETUP] is lit.

Press [MENU].

Press [ ] [ ] in this order until the screen shown to the 

left appears.

Press [ ].

Press [ ] [ ] to select one from NAME1 to NAME40.

Press [ENTER] to confirm your entry.

The current "height position of media" and "print area setting" are 
saved.

Press [ ] or [ ] to enter a character.

When you have selected the character you want to enter, 

press [ ].

The characters you can enter are "A" through "Z," "0" through "9," and 
the "-" character. You can enter up to 15 characters, including spaces.

Press [ ] or [ ] to enter the next character.

Enter the following characters in the same way.

When you have finished, press [ENTER] to confirm your 

entry.

Press [MENU], then [ ] to go back to the original screen.

Description

The following settings configured in media setup can be saved as up to a maximum of 40 different types of 
presets.

 Height position of media

 P. 13, "Set Height Position of Media (Automatic)"

 P. 15, "Set Height Position of Media (Manual)"

 Print area (including print-start position)

 P. 18, "Specify the Print Area Directly"

 P. 19, "Specifying the Print Area from the Print Center Position"

You can assign a name to each preset. Using media names for these presets may aid recognition. These presets 
eliminate the need to perform the setting when you are using media with the same shape. You can also use 
presets and change just the print area, leaving the height setting unchanged.

 P. 33, "Load a Preset and Print/Fine-Tune and Print"

PRESET
SAVE

SAVE
NAME1

SET NAME

S

SET NAME

SAMPLE

Содержание VersaUv LEF - 12i





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды