manualshive.com logo in svg

Roland VersaUv LEF - 12i, Руководство пользователя

Поделиться
Скачать
Roland VersaUv LEF - 12i Скачать руководство пользователя страница 55

Checking for Remaining Ink and Replacing Ink Cartridges

53

Chapter 3 Maintenance

Chapter 3 Maintenance

Pull out the empty ink cartridge and imme-

diately insert the new one.

Close the ink cartridge cover.

Close the front cover.

WARNING 

 Never store ink, cleaning liquid, or discharged fluid in any of the following 

locations.

 Any location exposed to open flame

 Any location where high temperature may occur

 Near bleach or any other such oxidizing agent or explosive material

 Any location within the reach of children

Doing so may lead to a fire. Accidental ingestion by children may pose a health 
hazard.

 Keep the side with the arrow face up

 Insert and remove slowly, one at a time

 Important Notes on Replacing Cartridges

 Make sure that the ink cartridge cover is always closed except when absolutely necessary, such as 

when you are replacing ink cartridges. The ink inside the cartridges will become hardened, and it 
may cause the printer to malfunction.

 Be sure to replace with an item of identical type. 

 Never mix different types.

 Never leave the machine with an ink cartridge removed. The print heads may become clogged.

 Never insert or remove a partially used ink cartridge with undue force.

 Never remove an ink cartridge suddenly while the printer is in operation.

Содержание VersaUv LEF - 12i





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды