69
Chapter 3 Maintenance
Chapter 3 Maintenance
Replacing Consumable Parts
Replacing the Wipers
The wiper is a component that is used for cleaning the print heads. When the
screen displays a message like the one shown below, it is time to replace the
item. Replace them with new items.
For information about purchasing wipers, contact your authorized Roland
DG Corp. dealer.
When a warning beep sounds during wiper replacement
A warning beep sounds 10 minutes after operation begins. Stop work and close the front cover. Press [ENTER]
to exit the wiper replacement menu. After that, restart operation from the first procedure.
CAUTION
Be sure to perform operations as specified by the instructions, and never
touch any area not specified in the instructions.
Failure to observe this instruction may cause the machine to move suddenly, re-
sulting in injury.
1.
Enter the wiper replacement menu.
When the message shown in the figure appears, press
[ENTER].
Remove any media.
Press [MENU].
Press [ ] several times until the screen shown on the left
appears.
Press [ ].
Press [ ] twice.
Press [ ], then [ ].
Press [ENTER].
The print-head carriage moves, and then the screen shown in the
figure appears.
Open the front cover.
TIME FOR
WIPER REPLACE
TIME FOR
WIPER REPLACE
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
REPLACE WIPER
NOW PROCESSING..
OPEN FRONT
COVER