Basic Operation
12
Chapter 1 Basic Operation
Chapter 1 Basic Operation
Printable Area
Maximum Printable Area: Width 305 mm (12.01 in.) x depth 280 mm (11.03 in.) x height 100 mm (3.94 in.)
* The maximum printable area is inside the guide lines on the flat table.
* The maximum size of the media and the printable area are different.
How to Secure the Media
Procedure
Make sure the screen in the figure is displayed.
If it is not displayed, check that nothing has been placed
on top of the flat table, and hold [SETUP] for a long time.
The flat table will come forward into a position in which you can set
up the media. If the screen in the figure is not displayed, you cannot
set up the media.
Secure the media in place.
For printing tests, use media for testing (width 80 mm (3.15 in.) x length 70 mm (2.76 in.) or more), and
not the media you will actually use.
SETUP MEDIA
100 mm
(3.94 in.)
305 mm (12.01 in.)
280 mm (11.03 in.)
(Front)
Media
Flat table
Flat table
Guide line
Secure the media with tape.
Secure the media in place using a substance such as
commercially available tape affixed directly to the
flat table. This method can be used for thin paper
media or those that can be secured with tape only.
The media can be set anywhere as long as it does
not protrude from the flat table. Be aware that when
there are folds or kinks in the media, they might hit
the interior of the printer and cause damage.
