Roland VersaUv LEF - 12i Скачать руководство пользователя | Manualshive

Страница: 52 / 100

background image

50

Chapter 3 Maintenance

Chapter 3 Maintenance

Introduction: About Maintenance

Automatic Maintenance Function and Notes

This machine has a function that automatically performs maintenance periodically. Please observe the following
because operations, such as preventing the print heads from drying out are performed.



Always leave the main power on.



Do not leave the front cover open for a long time.



Return to the top menu after specifying settings in the menus.

Keep Performing Maintenance

Daily maintenance

Please perform regular maintenance to keep the machine in a condition to produce the best quality printing.



P. 54, "Maintenance That Should Be Performed Daily"

Periodic maintenance

There is maintenance you should perform periodically to ensure consistent output.



P. 58, "Periodic Cleaning Maintenance"

Switch the power on once every two weeks

Switch the sub power on once every two weeks. When you turn on the power, the machine automatically
performs operations such as those to keep the print heads from drying out. Leaving the machine unused
for a prolonged period may damage the print heads, so be sure to switch on the power to perform these
automatic operations.

Keep the machine at a constant temperature and relative humidity

Even when the machine is not in use, keep it at a temperature of 5 to 40°C (41 to 104°F) and a relative humidity
of 20 to 80% RH (with no condensation). Not doing so may cause the machine to break down.

Alarm Function

The alarm feature reminds you to switch on the sub power once a month.
When the machine remains unused for about one month, this screen
appears and a warning beep sounds. If this screen appears, switch on the
sub power. When maintenance operations finish, switch off the sub power.
This function operates when the printer's main power is turned on. Leave
the main power switched on at all times even when the printer is to remain
out of use for a prolonged period.

Important Note on Draining Ink

Although this machine has features for draining internal ink, it should never
be used except in special cases. Allowing the machine to stand without ink
for a prolonged period may damage the heads. Once ink has been filled,
then as a rule the ink should never be drained.

PRESS THE POEWR
KEY TO CLEAN

INK CONTROL
PUMP UP

«
...
50
51
52
53
54
...
»

Содержание VersaUv LEF - 12i





































































































Отзывы:

Нет отзывов

Похожие инструкции для VersaUv LEF - 12i

Бренд: Roland Страницы: 180

Бренд: MUTOH Страницы: 98

Бренд: MUTOH Страницы: 141

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды