Roland IU-1000F Скачать руководство пользователя страница 89

Страница: 89 / 144

If You Cannot Print as Expected

Problem

Cause

Solution

The image is smudged during

printing.

The print head nozzle faces,

wipers, or cap unit is dirty.

Perform the following:

Clean the wipers.

See "Cleaning Wipers",

Requests for Daily Care and

Maintenance.

Clean the capping station.

See "Cleaning the Capping

Station", Requests for Daily

Care and Maintenance.

Clean the areas around the

print heads.

See "Cleaning Around the

Print Heads", Requests for

Daily Care and

Maintenance.

Perform head cleaning.

For details, see page 51

"Cleaning Print Head

Nozzles".

There are blisters on the media

surface.

The media surface is dusty.

Make the work environment less

dusty.

•

Depending on the type or conditions of the media to be used, you may not obtain the print result you

expect. Make sure to use appropriate media. For details, see page 27 "About Media".

When nozzle clogging does not clear

This section explains how to recover the machine when nozzle defects are not resolved after cleaning is

performed.

Perform daily maintenance of the machine.

•

Clean around the print heads, capping station, wipers, and maintenance station.
See the following sections in Requests for Daily Care and Maintenance:

•

"Cleaning Around the Print Heads"

•

"Cleaning the Capping Station"

•

"Cleaning Wipers"

•

"Cleaning the Area around the Maintenance Station"

•

After cleaning, print nozzle check pattern.
For details, see page 46 "Test Printing".

If there is any problem with the printing result, proceed to the following procedure:

Содержание IU-1000F

















































































































































Результаты поиска

Содержание IU-1000F

Отзывы:

Похожие инструкции для IU-1000F

Бренды по названию

Популярные бренды

Roland IU-1000F, Руководство по эксплуатации

Результаты поиска

Содержание IU-1000F

Отзывы:

Похожие инструкции для IU-1000F

Бренды по названию

Популярные бренды