Roland IU-1000F, Руководство по эксплуатации

Страница: 32 / 144

2. Using Print Control
30
3. Proceed with the installation according to the instructions displayed on the screen.
• Change the settings if necessary.
4. In the component settings, select the print-head configuration and type of ink used with
this machine.
• Ink Config
Select the machine's ink configuration.
• Standard Ink Config: Standard ink configuration
• Double White Ink Config: Higher throughput with white ink
• Ink Type
Select the type of ink used with the machine.
• US Ink: US-BK, CY, MG, YE, WH, PR, GL
• UE Ink: UE-BK, CY, MG, YE, WH
5. Click [Install].
6. Connect the machine and computer via a USB cable, and then click [OK].
7. Click [Finish].
A shortcut is created on the desktop.
• If Print Control is reinstalled, any contents that have been adjusted or set will be restored to their
initial state. Be sure to back up parameter data beforehand. For details, see page 80 "Backing
Up/Restoring the Settings".
• After changing the main unit's print-head configuration or ink, it is necessary to change the
component setting.
•
The display language in Print Control is set automatically according to the language setting of the
PC that starts up Print Control. Change the display language to display a different language other
than the one set with the PC language setting. For details, see page 78 "Changing the Display
Language".