Roland IU-1000F, Руководство по эксплуатации

Страница: 48 / 144

3. Basic Operations
46
Test Printing
Print a test pattern and check whether or not there are discharge defects such as nozzle clogging (blurring or
drop-out of printing).
Performing Test Printing
1. Set the media for test printing on the original position (0,0) of the table.
For details about how to set media, see page 53 "Setting Media on a Table".
2. Click the [Operation] tab.
3. Specify the print-start position of the X-coordinate.
For details about how to set the print-start position, see page 59 "Changing Print-start Position".
4. Click [Back] on the tool bar to make the carriage move to the original position.
5. Click [Status].
The [Medium Thickness] screen is displayed.
6. Click [Auto Detect] on the [Medium Thickness] screen.
The message screen is displayed.