Roland IU-1000F, Руководство по эксплуатации

Страница: 125 / 144

Replenishing and Replacing Consumables
123
6. Close the front cover and lock the cover.
Be sure to store the key in a safe place.
Replacing the Flushing Pad
Check the amount of ink accumulated on the surface of the pad at least once a week. If 3 mm (approx. 0.1
inches) of ink or more accumulates above the upper surface of the pad, replace the flushing pad.
• Be sure to wear gloves and goggles during the work. Otherwise, ink may drip or be scattered.
• Only use a genuine replacement pad. Otherwise, malfunction or damage may result.
• Do not place any object on the table as the carriage moves there during replacement.
1. Click [Maintenance Mode] on the [Print Option] tab in Print Control.
2. Click [Start].
Move away from the gantry as the carriage moves to the left-side ink receiver position.
3. Remove the used flushing pad located on the left side of the maintenance station.
Remove the pad from the grooves located at both ends.