Roland IU-1000F, Руководство по эксплуатации

Страница: 40 / 144

2. Using Print Control
38
2. Print Pieces
Sets the re-coating frequency with color ink.
3. Print Mode
From the pull-down menu, select the print mode.
Select the print mode according to the color combination in use and required image quality.
The following are the 5 types of image quality:
• [Draft]: Used to check the layout. You can select this only if the color set is 4C.
• [Production]: Prints at high speed but the quality is lowered.
• [Standard]: Prints at standard quality and speed.
• [Quality]: Prints at high quality but the printing speed is slower.
• [High Quality]: Prints at the highest image quality at a lower speed than "Quality".
For information about the types of ink, see page 132 "List of Consumables".
For details about the selectable print modes, see page 137 "List of Print Modes".
If the color combination includes W, Gl, or Pr, it is necessary to specify the spot color setting.
4. Multi Setting
Configure settings for multi-copy printing. See page 71 "Multicopy Printing".
5. Print Setting
Configure settings for the print-start position and multicoating of color ink, etc. For details about
multicoating, see page 74 "Multicoat Printing".
• X Pos/Y Pos: Sets the print-start position.
• Alternate: Performs reciprocating printing in multicoating. When [Reverse Dir] is selected, this
function cannot be used.
• X Mirror/Y Mirror: Reverses the image towards the X or Y direction.
• Reverse Dir: Moves the carriage from the opposite direction to print. When [Alternate] is
selected, this function cannot be used.
6. Print options
Enables the settings for a printing range or multiple printing, etc.
• Region: Enables the settings for "Region Setting".
• Multi: Enables the settings for "Multi Setting".
• Print Footnote: Enables footnote printing. For details about footnote settings, see page 76
"Printing a Footnote".
• Use/Carriage Speed: Sets the moving speed of the carriage.
7. [Print Size]
Click to configure the print size settings.
8. [Close]
Click to cancel the settings.
9. [OK]
Click to apply the settings.