Roland IU-1000F, Руководство по эксплуатации

Страница: 132 / 144

6. Maintenance and Specifications
130
8. Apply cleaning liquid to the cleaning stick, and then use the cleaning stick to apply
cleaning liquid to the nozzle faces of the print heads.
This prevents the ink from clogging on the nozzle surface while the machine is left unused.
You only need to apply cleaning liquid to the nozzle faces. Be careful not to rub the nozzle faces with
excessive force.
9. Click [Cap] to cap the print head.
10. To stop the ink discharge, return the indicated pressures to those you made a note of in
Step 4, check the necessary color, and click [Charge].
Ink is refilled. After the tanks have been refilled, the sub tank ink level indicated at the lower right of
the screen stops flashing and returns to its normal state.
If not stopping the ink discharge, go to the next step.
11. Turn off the power on the operation panel at the front of the machine.
12. Turn off the computer.
13. Pull the cover of the left-side ink receiver section to return it to its original position.
If you need to turn the machine off with the main power switch for a scheduled power outage, contact your
authorized Roland DG Corporation representative.