188
Using the Pads
You can strike the Fantom-G’s pads to play samples, rhythms, or
phrases, or you can use the pads as sixteen switches to turn various
parameters on/off. The pads can operate in one of sixteen modes.
Press [PAD MODE] to switch the pad mode.
1.
Press [PAD MODE].
The pad mode window will
appear in the screen.
[PAD MODE] will blink, and
the currently selected pad
mode (pad [1]–[16]) will blink.
If you decide not to switch the
pad mode, press [PAD
MODE] once again. [PAD MODE] will go dark, and you’ll
return to the previous state.
2.
Press a pad [1]–[16].
The pad mode will be switched. For details about operation in
each pad mode, refer to the table below and the corresponding
reference pages.
If you press the pad [NUMERIC]
button to make it light, the pads
will act as numeric keys.
→
By using the Hold function, you can make the sound continue even
after you take your finger off the pad. This is convenient when you
want a sound to continue, such as a phrase that you want to loop
(play repeatedly).
The Hold function is available only if the pad mode is
1 SAMPLE PAD or 2 RHYTHM.
Sustaining a sound while you play
other sounds
1.
While holding down a pad,
press [HOLD].
[HOLD] and the pad will
blink.
That pad will be held, and
will continue sounding even
after you release your finger
from it. If you press another
pad in this state, it will
sound only as long as you
continue holding it.
2.
The pad that was being held will stop sounding when you
press the blinking pad or [HOLD] once again.
Sustaining multiple sounds
1.
Press [HOLD] to make the
pad light.
2.
Press a pad.
The pad will blink, and will
continue sounding. If you
press other pads in this
state, they will also continue
sounding.
3.
The sound will stop when
you once again press a blinking pad. If you press [HOLD],
all pads will stop sounding.
The Hold function won’t work in the following situations.
“NO-SUS”
• For a sample set in which
Common Operations for Pads
Switching the Pad Mode (PAD MODE)
Pad
number
Pad mode
Explanation
Page
1
SAMPLE PAD
The pads play a sample set
2
RHYTHM
The pads play a rhythm set
3
CHORD MEMORY
The pads switch chord form for
the Chord Memory function (p.
81)
4
ARPEGGIO
The pads switch styles for the
Arpeggio function (p. 78)
5
RPS
The pads play phrases
6
RHYTHM PTN
The pads play rhythm patterns
7
TONE SEL/SW
The pads act as tone select and
on/off switches
8
TRACK MUTE
The pads switch muting on/off
for sequencer tracks
9
BOOKMARK
The pads recall frequency-used
screens that you’ve registered
10
MIDI TX SW
The pads act as on/off switches
for external MIDI transmit chan-
nels (1–16)
11
EFFECT SW
The pads switch the effects (oth-
er than the patch multi-effects)
12
PATCH MFX SW
The pads switch the patch multi-
effect for each part
13
PART SELECT
The pads select parts (1–16) and
banks (INT/EXP1/EXP2/EXT)
14
PART MUTE
The pads switch muting on/off
for parts (1–16) and banks (INT/
EXP1/EXP2)
15
USER GROUP
The pads register/recall patch-
es, live sets, or studio sets from
the user group
16
FAVORITE
The pads register/recall Favor-
ite settings
Using the Pads as Numeric Keys
(NUMERIC)
Using the Hold Function to Sustain
the Sounds (HOLD)
Fantom-G_r_e.book 188 ページ 2009年7月2日 木曜日 午後2時55分