RoHS Compliant START-S12-M, Инструкции и предупреждения для установщика

Страница: 83 / 177

START-S12 Technical manual
-18-
5 Functions
Imp. N°
Val.
Functions Description
S 01 1
Signal Reverse
By each START command inverts: OPEN-CLOSE
It recloses automatically
2
Automatic
The START command can open or recharge the pause
time. It recloses automatically
3
Bistable function
By each START command it follows:
open-stop-close-
stop-open ... It doesn’t recloses automatically
4
Stable function with
automatic reclosing
after pause time
By each START command it opens-stops-closes-
stops-opens... It recloses automatically after pause time
5
Signal reverse
+ Dead-man function
Same as function S01 - 1
OPEN and CLOSE with “Dead-man function“ function
6
Collective use
+ Dead-man function
Same as function S01 - 2
OPEN and CLOSE with “Dead-man function“ function
7
Bistable function
+ Dead-man function
Same as function S01 - 3
OPEN and CLOSE with “Dead-man function“ function
8
Bistable function with
automatic reclosing
after pause time
+ Dead-man function
Same as function S01 - 4
OPEN and CLOSE with “Dead-man function“ function
S 02 1
Reclosing when
turning on
(Standard value 0)
Complete open and close. ONLY when the tension has
been interrupted when the gate is open.
S 04 1
It detects the passage
(Standard value 0)
The access will be detected from the photo-beams, if
S07
is
0
the pause time is 2sec.
S 07 1
It reverse in case
of access
(Standard value 1)
Put S04 in 1 . When the gate is opening, the control unit
inverts the direction and close.
S 08 2
Logic of the
Obstacle Detection
(Standard value 2)
1 - Function as limit switch
2 - Function as STOP
3 - Function as REVERSE and then STOP
4 - Automatic adjustment of motor torque, function L09 choose
the right function according to the motor installed
(not for sliding gates or safety devices).
5.1 Logic of functions