RoHS Compliant START-S12-M, Инструкции и предупреждения для установщика

Страница: 44 / 177

START-S12-M Technical manual
-11-
Press P1 when the door is
open, the display shows the
SPEED of the MOTOR
P1
2.6 Display the number of cycles and the speed of the motor
•
mOTOR SPEED
It is possible to show the number of
cycles even pressing
P3
(expressed in
ten cycles)
P3
•
CYCLE COUNTER
P110 P109 P100
2.5 Cancel of the operation
When you confirm the operation you can read the following message to cancel the operation. If you press
P1
in 10 seconds, this operation will be cancelled.
The counter counts up to 999’999 openings. The
display shows the first 4 most significant digits.
344.2
If you read these number, it
means that the installation
has made 344200 cycles.
DESACTIVATE ThE COMPlETE CYClE Of ThE CYClE fUNCTION
WhEN ThE TENSION hAS BEEN INTERRUPTED:
keep pressed
P1 when turns on.
P1
2.7 Desactivation of the cycle when the control panel wil be turned on
When the tension has been interrupted and you turn on the control board again it will make a new cycle. To
exclude this operation make as follow: