RoHS Compliant START-S12-M, Инструкции и предупреждения для установщика

Страница: 75 / 177

START-S12 Technical manual
-10-
To save all changes it is possible to select a password of 4 numbers. To activate this function make as follow:
•
PASSWORD ACTIVATION:
Press P1 , P2 and P3 in the function S32 and then confi rm with P1 .
0---
• INSERT PASSWORD
Choose the fi rst number with the buttons P2 and P3 then
confi rm with P1 . The same procedure applies to the other
digits.
2.4 Set up a password for programming
P1
Access to the menu
-
t
-
P2
2nd press
-
S
-
P1 confi rm
S 01
S 32
P2
In the function S if you press P1 , you can choose the group function: fi rst select P2 , now you can go to the
function S32 and then confi rm with P1 .
P1 - OK
S 33
• DEACTIVATION OF THE PASSWORD
P1 - OK
If you select the fucntion no. S33 you can cancel the password.
Wait 10 seconds to confi rm the operation.
fi nished entering the 4 digit. Press P1 to confi rm. To can-
cel press P1 , within 10 seconds. Otherwise, the next ac-
cess will be required the security code.
Pay attention in case you forget
the password it is not possible to
enter in control board as well.
!