RoHS Compliant START-S12-M, Инструкции и предупреждения для установщика

Страница: 93 / 177

START-S12 Technical manual
-28-
SET
UP DESCRIPTION
VALUES ACCEPTED STANDARD MEMO
S 23 Copy set up of memory 1
S 24 Copy set up of memory 2
S 25 Charge the set up of memory 1
S 26 Charge the set up of memory 2
S 27 Charge the standard set up 1
S 28 Charge the standard set up 2
S 29 Charge the standard set up 3
S 30 Charge the standard set up 4
S 31 Charge the standard set up 5
S 32
Activate of a password to set up with a code of 4 num-
bers. Put the new code and let the time goes.
S 33
You can deactive the access of the set up
with a password
S 34
Activation of the security closing
after intervention of the edge (20-21)
0 deactivated - 1 activated 0
S 35 Activation of the INTERLOCK function 0 deactivated - 1 activated 0
S 36 Check of the input UNFOLDING (terminal board no.16) 0 deactivated - 1 activated 0
S 37
Integrated electric brake
(activated for 2 seconds after motor stopping)
1= light acceleration
4 = heavy acceleration
5=neither acceleration nor braking
6= light braking
9= heavy braking
0
S 38 Safety edge - contact terminal board no.20-21 0: N.C. contact - 1: 8K2 contact 1
SET UP DESCRIPTION
R 01 Activate Opening until P1 has been released with acceleration set up
R 02 Activate CLOSING until P1 has been released with acceleration set up
R 03 Activate the OPENING until P1 has been released with slow down acceleration
R 04 Activate CLOSING until P1 has been released with slow down set up
R 05
Activate LIGHT/SIGNAL LIGHTH until P1 has been released
R 06 Activate TEST output until P1 has been released
R 07 Display the tension of the capacitors until P1 has been released
R 08
Display temperature of the IGBT until P1 has been released
R 09 Display the resistive value in the SAFETY EDGE input (terminal board no.20) until P1 has been released
R 10 Display the number of cycles number of cycles until P1 has been released
(point indicated the thousands)
R 11 Activate the brake output
Group functions “R”