RoHS Compliant START-S12-M, Инструкции и предупреждения для установщика

Страница: 73 / 177

START-S12 Technical manual
-8-
If you don’t press any button, the display shows the position and the temperature of the heat sink.
-
S
-
-
r
-
-
L
-
-
t
-
-
E
-
Set up T
Set up of the Time
programming
Set up L
Set up of the programm
(Speed, power...)
Set up S
Logic of the control unit
Set up R
Activation of the outputs
Displays information
about the control unit
Set up E
Back to the standard functions
ACCESS TO THE fUNCTIONS
Press P1 when the gate is closed
P1
SELECTION OF NUMBER SET UP
Press P2 and P3 to select the set up
Press P1 to confi rm
P2 - UP P3 - DOWN
P1 - OK
GO BACK
To go back to the previous
group press P2 and P3
P2 P3
+
START-S12 has a display for a simple and fast programming. The menu has been designed for a clear and
fast set up of the working time and the logic of the control unit. You can set up the control unit only when the
door is closed.
2 Use and functions of the control panel
t23c
P.Fcc
In this case the door is with closing limit switch and
that the heat temperature is 23°C.
2.1 State of the control unit
2.2 Settings and parameters
SELECTION OF THE LETTER ADJUSTMENT
Press button P2 and P3 to select the group
and press P1 to confi rm.
P2 - UP P3 - DOWN
P1 - OK
SELF-RESET
If the control unit is not used for more
than one minute, the control unit go out
from the programming saving
programs and all changes.