CTS60
Module Test
1094.0006.60
11.9
E-4
11.6
Menu RF Signal Gen.
Selecting this menu automatically activates RF Signal Generator output within the CTS hardware. When
the menu is exited from, then the RF Generator output is automatically deactivated.
The initial settings used for the RF Generator are taken from the selected MOD Type. The generator
output can be modified from within this menu, by changing various settings, but this will not overwrite the
settings for the currently selected MOD Type. Any changes made to the settings displayed on this menu
will be indicated by the selection of “(modified)” being present in the “MOD Type” field.
Menu RF Signal Gen.
The following fields can be selected for modification using the “Next Field” softkey. Any modifications will
have an immediate effect on the RF Generator output.
RF Level
Setting of the transmit power between -40 dBm and -100 dBm (referred to RF IN/OUT) in steps of 0.1
dB.
RF Chan/ Freq
Input of the channel number of the signal to be transmitted. Channel numbers between -3 and 12 at half
the DECT channel spacing (864 kHz) are possible. The frequency associated with the selected channel
will also be displayed alongside.
Deviation
Input of the modulation deviation between 0 and 510 kHz in multiples of 2 kHz. For an unmodulated
signal, 0 must be entered.
Signal
This is the current type of signal modulation in effect. A new type of signal modulation can be selected
from the menu “Select Signal Type” by pressing the softkey “Select Signal”.
