CTS60
Autotest Printed Reports
1094.0006.60
7.1
E-3
7
Autotest Printed Reports
7.1 Overview
From the autotest results menu it is possible to print out a report of the displayed results. The following
sections describe each of the different parts of the report in detail.
The header at the top of the first page describes details of the test and its configuration. On subsequent
pages a smaller header is displayed. At the end of the test report after the last measurement result a
footer is printed with the results of the entire test.
Since the autotest is configurable autotest actions can be executed in any order and each test step
could be executed several times if a conditional goto is used. Every action, with the exception of bearer
release, pause and goto has its own section of the report. These sections will be printed in the order that
the test steps are executed and each section details the number of the test step which was executed.
Important notes:
The overall test will have a result as "FAILED" if any of the individual tests had failed.
The autotest report (both on the screen and printed) will contain only the last 3000 screen lines of the
test. When the report reaches this number the first lines will be discarded.
