Rockwell Automation 700-1308-00 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 138

Rockwell Automation 700-1308-00 Скачать руководство пользователя страница 6

About This Manual

6

MagneMotion

Rockwell Automation Publication MMI-UM037A-EN-P - April 2020

MagneMotion Documentation

The documentation that is available for the MagneMover LITE components includes this
manual, which provides service and maintenance information for the MM LITE components
as a transport system. Other manuals in the document set, which are listed in the

section, support installation, configuration, and operation of the transport system.

The examples in this manual are included solely for illustrative purposes. Because of the
many variables and requirements that are associated with any LSM system installation, Mag-
neMotion cannot assume responsibility or liability for actual use that is based on these exam-
ples.

Notes, Safety Notices, and Symbols

Notes, Safety Notices, and Symbols that are used in this manual have specific meanings and
formats. Examples of notes, the different types of safety notices and their general meanings
are provided in this section. Adhere to all safety notices provided throughout this manual to
achieve safe installation and use.

Notes

Notes are set apart from other text and provide additional or explanatory information. The text
for Notes is in standard type as shown in the following example.

NOTE:

A note provides additional or explanatory information.

Safety Notices

Safety Notices are set apart from other text. The color of the panel at the top of the notice and
the text in the panel indicates the severity of the hazard. The symbol on the left of the notice
identifies the type of hazard (see

Symbol Identification

for symbol descriptions).

The text in the message panel identifies the hazard, methods to avoid the hazard, and the con-
sequences of not avoiding the hazard.

Examples of the standard safety notices that are used in this manual are provided in this sec-
tion. Each example includes a description of the hazard level indicated.

DANGER

Danger

indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

«
...
4
5
6
7
8
...
»

Содержание 700-1308-00











































































































































Отзывы:

Нет отзывов