manualshive.com logo in svg

Rockwell Automation 700-1308-00, Руководство по обслуживанию

Поделиться
Скачать
Rockwell Automation 700-1308-00 Скачать руководство пользователя страница 26

Safety
Magnetic Hazards

26

MagneMotion

Rockwell Automation Publication MMI-UM037A-EN-P - April 2020

Magnetic Hazards

The MagneMover LITE transport system uses high strength Neodymium Iron Boron (NdFeB) 
magnets in the magnet arrays that are attached to the vehicles (pucks). The proper precautions 
for using high strength magnets must be observed.

WARNING

Magnetic Field Hazard

Strong magnets in use.

To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
array on the vehicles (pucks).

CAUTION

Pinch/Crush Hazard

Strong magnets in use.

To avoid injury:
•

Handle only one vehicle (puck) or magnet array at a time.

•

Do not place any body parts (for example, fingers) 
between a magnet array and any ferrous material or 
another magnet array to avoid injury from strong mag-
netic attractive forces.

•

Vehicles (pucks) and magnet arrays not being used must 
be secured individually in isolated packaging.

NOTICE

Magnetic Fields

Strong magnets in use.

To avoid damage to watches, electronic instruments, and
magnetic media (for example, cell phones, memory
disks/chips, credit cards, and tapes) keep these items away
from the magnet arrays.

Содержание 700-1308-00











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды