Rockwell Automation 700-1308-00 Скачать руководство пользователя страница 19

Страница: 19 / 138

Safety

Symbol Identification

MagneMover LITE Service Manual

Rockwell Automation Publication MMI-UM037A-EN-P - April 2020

Symbol Identification

Symbols are used in this manual and on the MagneMotion products to identify hazards, man-
datory actions, and prohibited actions. The symbols that are used in this manual and their
descriptions are provided in the following tables.

Table 2: Hazard Alert Symbol Identification

Symbol

Description

General Hazard Alert

– Indicates that failure to follow recommended pro-

cedures can result in unsafe conditions, which could cause injury or equip-
ment damage.

Lifting Hazard

– Indicates that the specified object is heavy or awkward to

handle. Personnel must use lifting aids and proper techniques for lifting to
avoid muscle strain or back injury.

Automatic Start Hazard

– Indicates the possibility of machinery automati-

cally starting or moving, which could cause personal injury.

Hazardous Voltage

– Indicates that a severe shock hazard is present that

could cause personal injury.

Magnetic Field Hazard

– Indicates that a strong magnetic field is present

that could cause personal injury.

Pinch/Crush Hazard

– Indicates that there are exposed parts that move,

which could cause personal injury from the squeezing or compression of fin-
gers, hands, or other body parts between those parts.

Содержание 700-1308-00











































































































































Результаты поиска

Содержание 700-1308-00

Отзывы:

Бренды по названию

Популярные бренды

Rockwell Automation 700-1308-00, Руководство по обслуживанию

Результаты поиска

Содержание 700-1308-00

Отзывы:

Бренды по названию

Популярные бренды