manualshive.com logo in svg

Rockwell Automation 700-1308-00, Руководство по обслуживанию

Поделиться
Скачать
Rockwell Automation 700-1308-00 Скачать руководство пользователя страница 135

Maintenance

Shipping

MagneMover LITE Service Manual

135

Rockwell Automation Publication MMI-UM037A-EN-P - April 2020

1.

Turn off and disconnect all electrical and pneumatic power as described in 

Safe 

Shut-down

 on page 36

.

2.

Disconnect all communication connections as described in 

Safe Shut-down

 on 

page 36

.

3.

Make sure that the system or component has been properly decontaminated following 
the decontamination procedures for the facility. Follow all facility, local, and national 
procedures for the disposal of any hazardous materials.

4.

When shipping individual components, remove all components to be shipped (see the 

MagneMover LITE User Manual

 and reverse the sequence to remove the components) 

and see 

Shipping Components

 on page 135

.

When shipping systems, see 

Shipping Systems or System Sections

 on page 135

.

Shipping Components

1.

Each component must be wrapped, bagged, and packed following standard packing 
procedures.

2.

Use the container that the component was originally shipped in and set the component 
into the container and secure using the supplied packing material.

3.

Close the shipping container and secure.

4.

Make sure that the container is properly labeled (This End Up, Caution – Heavy, and 
so on) and all shipping documents are attached to the outside of the container.

5.

When shipping to MagneMotion, make sure that the RMA number is clearly visible on 
the outside of the container.

Shipping Systems or System Sections

1.

Bolt the feet to the bottom of the crate.

CAUTION

Magnetic Field Hazard

When shipping pucks or magnet arrays make sure
that the shipping container properly isolates the mag-
nets and identifies the Magnetic Field Hazard.

Содержание 700-1308-00











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды