Roche ACCU-CHEK Inform II, Руководство оператора

Страница: 34 / 212

1
• Introduction
34
1.10 Instructions for initial setup
The meter must be configured prior to initial use. During
this setup, the following parameters are configured:
■
Date and time format
■
Input mode for Patient ID
■
Input mode for Operator ID
■
Glucose controls: Type and schedule
■
Results screen for glucose control
■
Comments for entry after a test
■
Settings for data transfer
You can perform these settings on a limited basis directly
in the
Setup Menu of the meter. For more information
about configuration using the Setup Menu , see
Chapter 9, as well as Appendix A. In addition to this
option, the meter can be configured using a data man-
agement system. Suitable data management systems
provide a range of functions for configuring the meter
that go beyond what is possible with the meter-based
configuration feature.
For questions about using data management systems,
contact your Roche representative (see Chapter 12).
To ensure standardized configuration within a facility,
the meter-based
Setup Menu may be disabled.