Roca LUMEN AVANT Скачать руководство пользователя страница 62

Страница: 62 / 82

Cleaning and maintenance

Cleaning the fi lter

If the fi lter on the air inlet becomes clogged with dust, etc., performance will be affected. Clean the fi lter about once a

month when using the toilet normally.

Clean the fi lter once a month when using the toilet normally.

Wash the filters in water

to remove dust, etc.

Install the filters at each air inlet.

[Note]

●

Do not use the toilet with the fi lter removed.

* Doing so could cause failure.

Dry the filters.

Remove the filters from the two air

inlets at each side of the toilet.

Mount the top cover.

Remove the top cover.

* Press the top cover until a click is heard.
* If the top cover cannot be set in place, the fi lter

may not be inserted completely. Insert the fi lter
again.

Top cover

Anti-bacteria ion filter

Deodorizing filter

Disconnect the power plug from the

outlet.

Insert the power plug into the outlet.

■

When using the toilet again.

Be sure to perform the

preparation and checks before use. (

☞

See page 13.)

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

Содержание LUMEN AVANT



















































































Результаты поиска

Содержание LUMEN AVANT

Отзывы:

Roca LUMEN AVANT, Руководство пользователя, Страница: 62 / 82

Результаты поиска

Содержание LUMEN AVANT

Отзывы: