
Cleaning and maintenance
59
Replacing the nozzle tip
Removing the nozzle
When contamination on the nozzle tip cannot be removed, the nozzle tip should be replaced.
* Refer to “Optional parts” (
☞
page 79) for how to purchase optional parts.
Set the AUTO SEAT-OPEN and AUTO
CLEAN buttons to “OFF.”
Press the NOZZLE CLEANING button.
Press the STOP button to stop the
nozzle.
To replace the bidet nozzle
Press the NOZZLE CLEANING button
again.
* The bidet nozzle extends and moves back and
forth.
* The nozzle stops for approximately 5
minutes. Replace the nozzle tip.
(The nozzle retracts to its original position
after approximately 5 minutes.)
Turn the nozzle tip counterclockwise to
align the right corner of the nozzle tip
with the left corner of the nozzle, and
pull out the nozzle tip.
* Install a new nozzle tip as described in
“Assembling the nozzle” (
☞
page 60) while the
nozzle is stopped.
* The posterior nozzle extends and moves back and
forth.
* Water will spray out from a point near the nozzles.
Turn counterclockwise.
Pull
[Note]
●
The nozzle tip cannot be replaced while a user
is sitting on the toilet seat.
Lift the seat lid and seat.
* Otherwise, the sensor may detect a person and close
the toilet seat or flush the toilet.
Nozzle tip
Align the corners.
STOP
AUTO SEAT-OPEN
AUTO CLEAN
NOZZLE CLEANING
NOZZLE CLEANING
E-Bidet.ru -
официальный
дилер
Roca Lumen Avant
в
РФ
(http://e-bidet.ru)
E-Bidet.ru -
официальный
дилер
Roca Lumen Avant
в
РФ
(http://e-bidet.ru)