Roca LUMEN AVANT Скачать руководство пользователя страница 22

Страница: 22 / 82

Operation

General operation

Bidet washing

▶

Wide washing

▶

Super-wide bidet washing

Bidet washing

●

Press the BIDET button.

Water is sprayed from the nozzle tip.

●

Press the STOP button to

stop spraying water.

For wide washing

Press the BIDET button again while using bidet washing.

* The nozzle moves back and forth to wash a wider range.
* Press the STOP button to stop spraying water.

For super-wide bidet washing

Press the BIDET button again while bidet washing in wide mode.

*  The nozzle moves back and forth to wash an even wider range.
*  Press the STOP button to stop spraying water.
*  Press the BIDET button to return to normal bidet washing.

To adjust the spray strength for bidet washing

* There are six levels of spray strength. Adjust the spray

strength as desired.

* The strength is indicated by the spray strength indicator

on the LCD.

P r e s s t h e

o r

S P R AY

STRENGTH button.

Bidet washing

The bidet washing function

includes an auto-stop

function to stop washing

after 2 minutes.

A nozzle auto cleaning function is

provided to automatically clean the

nozzle before and after washing.

What are wide washing and super-wide washing?

The wide washing function moves the
nozzle back and forth while bidet washing is
performed to wash a wider area.

The super-wide washing function moves the
nozzle back and forth while bidet washing is
performed to wash an even wider area.

Nozzle auto cleaning

BIDET

STOP

SPRAY STRENGTH

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

Содержание LUMEN AVANT



















































































Результаты поиска

Содержание LUMEN AVANT

Отзывы:

Roca LUMEN AVANT, Руководство пользователя, Страница: 22 / 82

Результаты поиска

Содержание LUMEN AVANT

Отзывы: