Roca LUMEN AVANT Скачать руководство пользователя страница 59

Страница: 59 / 82

Cleaning and maintenance

[Note]

●

Do not apply excessive force to the nozzles.

* Failure may occur.

●

Do not pull or push the nozzles.

* The nozzle will break and not be retracted.
When you pull or push the nozzles by mistake, disconnect the power plug from the outlet, wait about 30

seconds, and insert in the power plug into the outlet again.

To stop the motion of the nozzle

The nozzle stops.

Press the STOP button.

Press the STOP button again.

The nozzle retracts.

* The nozzle stops.

* The nozzle retracts.

Cleaning the nozzle during maintenance (continued)

Press the NOZZLE CLEANING

button.

* The posterior nozzle retracts and then the bidet

nozzle extends.

Clean the bidet nozzle.

Press the NOZZLE CLEANING

button.

* Since the nozzle

moves in a short
stroke, the nozzle
can be cleaned by
simply applying
the sponge to it.

* The nozzle stops for approximately 5 minutes

and then automatically retracts.

Clean the posterior nozzle.

* Since the nozzle moves in a short stroke, the nozzle

can be cleaned by simply applying the sponge to it.

* The nozzle automatically retracts after 1 minute. When

the NOZZLE CLEANING button is pressed again after
the nozzle retracts, the nozzle extends again.

* The bidet nozzle retracts.

STOP

NOZZLE CLEANING

* The nozzle automatically retracts after 1 minute. When

the NOZZLE CLEANING button is pressed again after
the nozzle retracts, the nozzle extends again.

Nozzle

Sponge

Nozzle

Sponge

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

Содержание LUMEN AVANT



















































































Результаты поиска

Содержание LUMEN AVANT

Отзывы:

Roca LUMEN AVANT, Руководство пользователя, Страница: 59 / 82

Результаты поиска

Содержание LUMEN AVANT

Отзывы: