Roca LUMEN AVANT Скачать руководство пользователя страница 35

Страница: 35 / 82

Useful functions

* “SETTINGS BEING CHANGED” fl ashes while the setting

is being switched.

* “SET MORNING/NIGHT” fl ashes.

Morning and night mode

* Pressing the button turns on and off the

indication “SET MORNING/NIGHT.”

(1) Press the MODE EXCHANGE

button once and then the SWITCH
MODE button three times.

(3) Press the MODE EXCHANGE

button to defi ne the setting.

(2) Press the

CHANGE

MODE button.

* When the SWITCH MODE

button is pressed

instead of the MODE EXCHANGE button, the process
to change the start time for morning mode starts.

While “SET MORNING/NIGHT” is lit

What are morning and night modes?

The default settings for morning and night modes are as follows.

Time for morning mode AM 6:00

―

AM 11:00

Time for normal mode

AM 11:00

―

PM 6:00

Time for night mode

PM 9:00

―

AM 6:00

Night mode

AM 6:00

PM 12:00

AM 12:00

PM 6:00

PM 9:00

AM 11:00

<Sub-operation panel on the remote control>

* When no operation is performed for 15 seconds while making this

setting, the indication returns to the normal status.

In this case, the setting for morning and night modes will not be

changed.

Morning

mode

Normal

mode

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

Содержание LUMEN AVANT



















































































Результаты поиска

Содержание LUMEN AVANT

Отзывы:

Roca LUMEN AVANT, Руководство пользователя, Страница: 35 / 82

Результаты поиска

Содержание LUMEN AVANT

Отзывы: