Roca LUMEN AVANT Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 82

Roca LUMEN AVANT Скачать руководство пользователя страница 21

Operation

20

Mild washing

●

Press the MILD button.

●

Press the STOP button to stop spraying water.

Mild washing

▶

Wide washing

▶

Wide S washing

Water is sprayed from the nozzle tip.

For wide washing

Press the MILD button again while washing the posterior.

* The nozzle moves back and forth to wash a wider range.
* Press the STOP button to stop spraying water.

For wide S washing

Press the MILD button again while washing the posterior in wide mode.

*  The nozzle moves back and forth in a short stroke for more thorough washing.
*  Press the STOP button to stop spraying water.
*  Press the MILD button to return to mild washing.

To adjust the spray strength for mild washing

* There are six levels of spray strength. Adjust the spray strength as desired.
* The strength is indicated by the spray strength indicator on the LCD.

Press the

or

SPRAY

STRENGTH button.

Washing function

The bidet washing function

includes an auto-stop function to

stop washing after 2 minutes.

A nozzle auto cleaning function is

provided to automatically clean the

nozzle before and after washing.

What are wide washing and wide

S washing?

The wide washing function moves the
nozzle back and forth while washing
the posterior to wash a wider area.

The wide S washing function moves
the nozzle back and forth in a short
stroke while washing the posterior
to wash more thoroughly.

Nozzle auto cleaning

STOP

MILD

SPRAY STRENGTH

or

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

в

РФ

(http://e-bidet.ru)

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

в

РФ

(http://e-bidet.ru)

«
...
19
20
21
22
23
...
»

Содержание LUMEN AVANT



















































































Отзывы:

Нет отзывов