Roca LUMEN AVANT Скачать руководство пользователя страница 57

Страница: 57 / 82

Cleaning and maintenance

Removing the nozzle shutter

Keeping the nozzle shutter clean

Lift the seat lid and seat.

Press the knobs on both sides of the

nozzle shutter and slowly pull out the
shutter.

●

Wipe the nozzle shutter with a soft cloth or sponge

dampened with water or warm water. Neutral

cleanser may be used.

The nozzle shutter is finished with Plus Guard.

(

☞

See page 6.)

[Note]

●

Avoid wiping with dry cloth or toilet paper.

* Doing so could result in scratches.

●

Do not use an abrasive brush or cleanser.

* They will deteriorate the effects of Plus Guard.

Assembling the nozzle shutter

Press the knobs on both sides of the

nozzle shutter and slowly insert the
shutter.

[Note]

●

Push the nozzle shutter until a click is heard.

Check that the shutter is correctly assembled.

Wash the removed nozzle shutter.

The nozzle shutter can be removed for cleaning.

①

②

①

②

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

Содержание LUMEN AVANT



















































































Результаты поиска

Содержание LUMEN AVANT

Отзывы:

Roca LUMEN AVANT, Руководство пользователя, Страница: 57 / 82

Результаты поиска

Содержание LUMEN AVANT

Отзывы: