Useful information for convenience and safety
45
Other references
Useful information for convenience and safety
The occupied seat sensor
prevents incorrect operations.
This toilet is equipped with an occupied seat sensor that
prevents water from spraying even if the button is pressed
by mistake when nobody is sitting on the toilet seat.
* The WASH, BIDET, and DRY buttons do not
operate unless the user is sitting on the toilet seat.
* When the seat cover and/or seat lid cover are
set, the occupied seat sensor may not function
correctly.
The body sensor allows you to open
the seat lid without using your hand.
This toilet is equipped with a body sensor that detects when a
person is standing in front of the toilet, and opens and closes
the toilet seat lid automatically.
The sensor detects a person standing just in front of the toilet.
* The sensor cannot detect the user and the seat lid
may not open if they stand to the side at the front of
the toilet or away from the toilet.
* The body sensor does not function correctly if dirty.
In this case, wipe the sensor with a damp soft cloth.
The battery indicator on the remote
control unit indicates the battery
charge. Replace the batteries with
new ones as soon as possible.
* Depending on the size of the room, fi nishing and color (particularly a dark
color) of the wall, etc., the remote control unit may stop functioning before
the battery indicator starts fl ashing since the signal becomes weak.
* If a button on the remote control unit is pressed with the toilet room door
open or with the battery indicator fl ashing, the signal may not reach the
toilet and the specifi ed function may not be activated.
A low battery indicator is
provided.
Since the occupied seat sensor uses light refl ection,
it does not function in the following cases.
●
If the user bends forward or sits on the front of the seat
* Change your sitting posture, for example, sit further back on the
seat.
●
If the user wears black or fl uffy clothes that do not refl ect light easily
* Place a hand above the sensor, etc. so that the sensor can
detect the skin.
●
If the sensor is dirty or wet
* Remove dirt or water.
The toilet seat and seat lid close slowly.
To prevent the toilet seat and toilet
seat lid from being lowered forcefully
by mistake, a damping mechanism
is provided to lower them gradually.
* Note that the toilet seat or toilet seat lid may be
damaged if these are closed roughly or too forcefully.
* These close slowly only when the power is turned on.
The temperature of water and
toilet seat is adjusted constantly.
The temperature of the water spray is set to the level
specifi ed by the button setting.
Temperature control in the warm water tank
OFF (water temperature), approx. 32°C (low) – approx. 40°C (high)
The temperature of the seat is set to level specifi ed
by the button setting.
Seat temperature
It takes about 10 minutes to warm the water.
When the washing and/or bidet function is used for an extended time, the
temperature of the water sprayed gradually lowers to normal water temperature.
It takes about 10 minutes to warm the water.
OFF (room temperature), approx. 28°C (low) – approx. 40°C (high)
E-Bidet.ru -
официальный
дилер
Roca Lumen Avant
в
РФ
(http://e-bidet.ru)
E-Bidet.ru -
официальный
дилер
Roca Lumen Avant
в
РФ
(http://e-bidet.ru)