Robur GAHP Line AR Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 24 / 100

GAHP-AR – Installation, start-up, use and maintenance manual
20
Edition: 2014-08
The special key allows the user to operate the knob of the electronic board without
opening the cover of the electrical panel, so as to be able to operate it safely, protected
from live components.
When the necessary settings have been completed, return the special key to where
it was found, replace the plug on the aperture of the electrical panel and refit the
front panel of the appliance.
To access the menus listed in Table 9, page 18 during operation of the appliance, it is
sufficient to press the knob once.
To move inside the menus using the knob:
You will need: access to the electrical panel (see previous procedure).
1. Scroll through the displayed items by turning the knob in both directions, clockwise
to view the next element and anticlockwise for the previous item.
2. Select an item by pressing the knob. In this way the user can access the menus and
the parameters grouped together in the menus, or, if the letter E is displayed, return
to the previous item.
Access to the viewing menus (menu 0, menu 1 and menu 7) is described in the next
paragraph, "Access to board menus".
Access to the operating menus for control of the appliance (menu 3, setting) and for
error, flame control unit and manual defrosting command (menu 2, execution) is
described in Paragraph
3.8 on page 44 and in Paragraph 2.4 on page 21.
Access to board menus
The following procedure illustrates how to access all the menus of the board. The
information provided is sufficient for access to the "viewing" menus 0, 1 and 7; for
access to the other menus (if allowed), additional information given in the specific
paragraphs is required (see the paragraph entitled "Description of menu of S61
board" on page 18).
To access the menu and view the current value of the parameters:
1. Press the knob; the display shows the first menu (menu 0):
2. Press the knob again to enter menu 0 which is displayed. The display shows the
menu number and the first parameter of the menu:
3. To scroll to other parameters of the current menu, turn the knob. The display shows
all the parameters of the menu, and lastly, the letter E: . Press the knob on
E to exit the current menu.