Electrical installer section
Ed.
2014-08
55
4.4 PUMP AND ELECTRICAL WIRING DIAGRAMS
Connection of the plant water circulation pump
Pump controlled directly by appliance, power < 700W
Figure 19 -
Example of pump/appliance electrical connection with 230 Vac pump (with absorbed power of < 4 A),
controlled directly by the appliance
Pump controlled by appliance with interposed relay, power
≥
700W
Figure 20 -
Example of pump/appliance electrical connection with 230 Vac pump (with absorbed power of
≥
4 A),
controlled directly by the appliance through a relay
GROUND CABLE HAS TO BE
CONNECTED BY A SUITABLE EYELET
TO THE GROUND PIN INTO THE
ELECTRICAL BOX, AND FIXED TO IT
BY THE PROPER PRESET NUT.
L, N WIRING TO THE
TERMINAL BOARD MUST
BE DONE RESPECTING
THE CORRECT POLARITY
GROUND CABLE HAS TO BE
CONNECTED BY A SUITABLE EYELET
TO THE GROUND PIN INTO THE
ELECTRICAL BOX, AND FIXED TO IT
BY THE PROPER PRESET NUT.
L, N WIRING TO THE
TERMINAL BOARD MUST
BE DONE RESPECTING
THE CORRECT POLARITY
Содержание GAHP Line AR Series
