Robox 3d printer, Руководство пользователя

Страница: 96 / 122

96 96
www.cel-robox.com
7.0 Calibration and Maintenance
Hardware - I’m having trouble
loading a new reel of filament
Firstly, ensure that you have fed filament all
the way to the feed wheels. When you insert
the filament, you should hear the extruder
motor begin to turn, at this point continue
pushing in
material until the extruder grabs
hold of the filament and feeds it all the way
to the head. If you do not hear the extruder
motor start when you feed in filament, it
is likely there is an issue with the ‘loaded’
switch in the extruder. When no reel is
installed, the extruder output switch should
appear as ‘false/off’ in the diagnostics screen
(described in section 5.3.10). There should
also be no eject button visible on the Status
screen. If you do see an eject symbol when
no filament is loaded, then there is an issue
with your output switch, please contact CEL
support - see section 8.4.
Hardware - There’s a clicking sound
coming from my extruder during
printing.
1. Verify the material is coming of the reel
easily and isn’t tangled.
2. Your extruder may require cleaning - this is
a simple procedure that can be performed
using a household vacuum cleaner. See
section X.X for further information.
3. Your printhead could be blocked. Try
running the purge procedure to clean
out any degraded plastic that may have
accumulated in the melt chamber.
If these procedures have no effect, please
contact CEL support.