Robox 3d printer, Руководство пользователя

Страница: 73 / 122

73 73
www.cel-robox.com
5.0 AutoMaker Software
•
Perimeter Print Speed (mm/s)
This parameter sets the speed at which perimeters (the walls of the object)
are printed in millimetres per second.
•
Small Perimeter Print Speed (mm/s)
This parameter sets the speed at which small perimeters (meant for holes,
islands and fine details) are printed in millimetres per second. A slower speed
than ‘Perimeter Print Speed’ is recommended for improved quality of small
details.
•
External Perimeter Print Speed (mm/s)
This parameter sets the speed at which external perimeters (the outside
surface of the object) are printed in millimetres per second.
•
Infill Print Speed (mm/s)
This parameter sets the speed at which infill (the internal filling of the object)
is printed in millimetres per second. This value should be as fast as you can
go without compromising the integrity of the fill structure. Faster extrusions
can break and result in weak spots of the object.
•
Solid Infill Print Speed (mm/s)
This parameter sets the speed at which solid infill (the bottom of the object
and any other solid layers) are printed in millimetres per second.
•
Top Solid Infill Speed (mm/s)
This parameter sets the speed at which top solid infill (the top surface of the
object) is printed in millimetres per second. This is usually slower to allow
time for the extrusion to cleanly cover the previous top layers and result in a
tidy top surface. The last few layers should have bridged the infill structure
nicely, preparing the way for a neat finish.
•
Support Material Print Speed (mm/s)
This parameter sets the speed at which support material is printed in
millimetres per second. This value should be as fast as you can go without
compromising the integrity of the support.