Robox 3d printer, Руководство пользователя

Страница: 65 / 122

65 65
www.cel-robox.com
5.0 AutoMaker Software
•
Layer Height (mm)
This setting defines the layer height (essentially the print resolution) of
the printed object. Users can select from any value between 20-400µm,
however this setting will dramatically affect print time as shown in the below
illustration:
Print
Representation
(1.6mm Total Height)
Layer Height 400µm 200µm 40µm 20µm
Number of Layers
4 8 40 80
Total Print Time 8 mins 16 mins 1hr 20mins 2hrs 40mins
Also apparent from this diagram is the improved surface finish that will
be acheived as layer height is decreased - notice the reduction in the
appearance of the ‘stair stepping’ effect.
•
Fill Density (%)
This setting changes the amount of material which is used to fill the interior
of the object. 100% signifies a completely solid object, and 0% is hollow.
•
Fill Pattern
This setting is used to change the pattern of the extrusion used to fill the
interior of the part. There are 7 different options to choose from:
Line Rectilinear Honeycomb Concentric Archimedean
Chords
Octagram
Spiral
Hilbert Curve
•
Infill Every n Layers
This setting forces Robox® to add a solid infill layer every
n
layers. To disable
this option, enter 0.
•
Top and Bottom Layers
This setting specifies how many solid layers will be used to complete the
top and bottom of the object. You may need to increase this setting if you
are printing an object with a top or bottom surface which tends towards
horizontal to avoid gaps in the outer surface.