Robox 3d printer, Руководство пользователя

Страница: 11 / 122

11 11
www.cel-robox.com
1.0 Introduction
Operation Safety
•
Before using the product, ensure all cables are correctly connected to a power
supply that matches the rating label and the power cables are not damaged. If
you detect any damage, contact your retailer immediately.
•
Do not place the product in any area where it may become wet or damp
and avoid dusty, humid and high temperature environments which could
negatively affect product performance. The printer is designed to work
properly at an ambient temperature of between 15°C and 25°C and humidity
of between 20% and 50%; Operating outside these limits may result in low
quality models.
•
Place the product on a stable surface away from flammable substances.
•
Do not allow metal or liquids to touch the internal parts of the product. Doing
so may cause damage, fire, electric shock or other serious hazards.
•
Always use the product in a well-ventilated area.
•
Do not use ABS plastic or its printed parts near any kind of heat source -
flames, fireworks, candles, incense, light bulbs etc. ABS will catch fire and burn
a thick black toxic smoke.
•
Power off the product and disconnect the power cable from the power outlet
in any of the following cases:
•
If there is any smoke coming from the product.
•
If the product is making an unusual noise not heard during normal
operation.
•
A piece of metal or a liquid touches the internal parts of the product.
•
During an electrical (thunder/lightning) storm
•
During a power failure
•
When the 3D printing head is installed in the product, there are moving parts
which can cause injury and heater elements which generate temperatures in
the region of 200-300°C. Never reach inside the product while it is in operation,
and never touch the print head while it is hot.
•
Always allow the product to cool down completely before reaching inside.
•
Never try to override the interlock on the door which protects the user from
these dangerous temperatures.
•
Contact with extruded material from the 3D print head may cause burns. Wait
for printed objects to cool before removing them from the build plate.
•
Do not leave Robox® unattended during operation.