Robotiq FT-150/300 Sensor
Instruction Manual
Robotiq inc. © 2016
22
2.
3.7 Status LED
A single status LED provides information on both Sensors, detailed information can be found in the tables below,
while a representation of both Sensor status LEDs is shown in Figure 3.6.1.
On the FT 150 Sensor, the LED is located on the Sensor, next to the cable connector :
COLOR
LED STATE
INFORMATION
-
off
No power
Blue / red
on
FT 150 Sensor is booting
Blue
on
FT 150 Sensor is functional
On the FT 300 Sensor, the cable sleeve is the LED conductor :
COLOR
LED STATE
INFORMATION
-
off
No power
Blue / red
on
FT 300 Sensor is booting
Red
on
FT 300 is functional, no
communication detected
Red
blinking
FT 300 Sensor fault detected
