Robe ColorSpot 2500E AT, Руководство пользователя

Страница: 8 / 40

5. Installation
5.1 Connection to the mains
Verify the power supply settings before applying power!
The factory settings are printed next to the power switch. If you wish to change the power supply settings, see the next
chapter.
Installl a -prong grounding-type plug on the power cable. The earth has to be connected!
If you have any doubts about proper installation, consult a qualified electrician.
The occupation of the connection-cables is as follows:
Cable (EU) Cable (US) Pin International
Brown Black Live L
Liht blue White Neutral N
Yellow/
Green
Green Earth
5.2 Changing the power supply settings
Electronic ballast
The operating range of the electronic ballast is 20-255V AC,50-0Hz. The transformer has to be set to the local AC
voltage.
If you want to change the power supply settings, follow the instructions:
1. Disconnect the fixture from AC power.
2. Remove the both top base covers by loosening the 12 screws.
. Move the wire () on the transformer connection block to the position according to the desired voltage.
. Close the base before applying AC power.
Example:
Power supply settins: 20V/50Hz