Robe ColorSpot 2500E AT, Руководство пользователя

Страница: 14 / 40

1
Ethernet connection
Connect the Ethernet-inputs of all fixtures in the fixture chain with the network.
Option “Ethernet” has to be selected from „Set Ethernet Mode” menu on the fixture.
Set IP address (002.xxx.xxx.xxx / 010.xxx.xxx.xxx) and the Universe.
Example:
(DMX address=)
IP addres=002.1.002.00
Universe=1
An advised PC setting: IP address: 002.xxx.xxx.xxx / 010.xxx.xxx.xxx (Different from fixture IP addresses)
NET mask: 255.0.0.0
Ethernet / DMX connection
Options „Ethernet/DMX” has to be selected from „Set Ethernet Mode” menu on the first fixture (connected to the network)
in the fixture chain, next fixtures have standard DMX addresses.
Connect the Ethernet-input of the first fixture in the data chain with the network. Connect the DMX output of this fixture
with the input of the next fixture until all fixtures are connected to the DMX chain.
Caution: At the last fixture, the DMX chain has to be terminated with a terminator. Solder a 120
Ω
resistor between Signal
(–) and Signal (+) into a XLR-plug and connect it in the DMX-output of the last fixture.
Example:
(DMX address=1)
IP addres=002.1.002.001
Universe=1
(DMX address=25)
IP addres=002.1.002.002
Universe=1
DMX address=73
IP address=002.1.002.002
Universe=0
DMX address=25
DMX address=217
DMX address=25
DMX address=1
DMX address=1
IP address=002.1.002.00
Universe=1