ENGLISH
78
The regulation of the plinth must be done inside
the woodbox, to access the vain extract the wood-
box as described in paragraph 2.14.
The plinth of the cookers can be regulated in order
to match the space in which the cooker is inserted.
It is possible to adjust the level of the cooker by
operating on the levelling pins that can be regulat-
ed in height. To do this, it is necessary to remove
the woodbox and regulate singularly each pin
placed in the plinth near the corners, so that the
adjustment of the cooker is correct. For the regula-
tion of the pins, use an hex key n.6: once you have
reached the desired height, fix the locknut with a
n.13 key (see picture 18). The pins have an excur-
sion of 50 mm.
2.15
STANDARD PLINTH REGULATION
Picture 18 – Regulation of the height of the cooker with hex key through the levelling pins.
0-50
mm
0-50
mm
N. 6
N. 13
To regulate the plinth recess to the front release
the bolt that keep fixed the plinth to the cooker:
the bolts are screwed vertically from the bottom
to the top. Then scroll the plinth in the chosen
position and close the bolts. For this operation it
is necessary an hex key size 8 (see picture 19). It
is necessary to pay attention to not remove com-
pletely the bolts, release them only for what it is
necessary.
Picture 19 – Regulation of the plinth recess to the
body of the cooker.
