CO
2
NNEXT
rev.01
EN
67 / 293
1.5.
Testing
The partly-completed machine is directly tested by the manufacturer during the production phases at the
headquarters of Rivacold s.r.l.
1.6.
Warranty
1.6.1.
General conditions
The Manufacturer, Rivacold s.r.l., guarantees the partly-completed machine and the equipment produced
by the Manufacturer itself as being free from material and processing defects for a period that is agreed
upon when the contract for the sale of the same machine is concluded.
The parts subject to wear and all the tools and consumables supplied by the Manufacturer together with the
machine are excluded from the warranty.
1.6.2.
Operations that invalidate the Warranty
Any attempt to disassemble, modify or tamper with a component of the partly-completed machine by the
user or by unauthorised personnel entails invalidating of the warranty and exempts the Manufacturer from
any responsibility for any damage to persons or property. deriving from such tampering.
The Manufacturer is also deemed to be exempted from any liability with invalidation of the warranty relating
to the partly-completed machine in the following cases:
x
unforeseen uses of the partly-completed machine (see Section 2.5 "Proper and improper use of the
partly-completed machine");
x
use contrary to that required by the regulations in force in the country of use;
x
installation of the partly-completed machine under conditions other than those specified in Chapter 4
- Transport and Installation;
x
installation not compliant with the specifications provided in Chapter 4 - Transport and Installation;
x
full or partial failure to comply with the instructions provided in this instruction manual;
x
non- or incorrect maintenance;
x
use of spare parts which are not original or not specified by the Manufacturer.
1.7.
Assistance
Regarding the maximum exploitation of the services provided by the partly-completed machine and the
extraordinary maintenance operations, this instruction manual does not replace the experience of trained
and qualified installers, users and maintenance technicians.
In this case, the Technical Assistance Service of Rivacold s.r.l. provides:
x
telephone support regarding the simplest features and interventions that can be performed on the
PARTLY-COMPLETED MACHINE;
x
sending of documentary material;
WARNING: If in any doubt about the correct interpretation of the instructions provided in these
assembly instructions, contact the Technical Assistance Service (as indicated below) to obtain the
NECESSARY clarifications.
1.7.1.
Request for assistance
The Technical Assistance Service contact details are:
TECHNICAL OFFICE OF THE COMPANY RIVACOLD S.R.L.
Telephone: (+39) 0721 919911 - Telefax: (+39) 0721
490015
Via Sicilia, 7 - Fraz. Montecchio
61022 VALLEFOGLIA (PU) - ITALY
Provide the name, model and serial number of the partly-completed machine when asking for assistance.
