Rivacold CO2NNEXT, Руководство по сборке

Страница: 6 / 59

CO
2
NNEXT
rev.01
EN
64 / 293
CHAPTER CONTENT
Chapter 1 General
information x Description of the assembly instructions, of their structure and of the
conventions used;
x definition of the terms used;
x definition of the relationship between the Manufacturer and the
Purchaser/User (in terms of warranty and assistance conditions).
Chapter 2
Introduction on safety x Presentation of general indications on the partly-completed machine, on
the solutions adopted for the protection of operating personnel;
x Presentation of the residual risks present
Chapter 3
Description of the
partly-completed
machine
x Description of the partly-completed machine
x presentation of the main technical data concerning the partly-completed
machine.
Chapter 4
Transport and Installation x Description of the methods for lifting and handling of the partly-
completed machine;
x description of the installation methods, electrical connection and
commissioning of the partly-completed machine;
x description of the mode of storage of the partly-completed machine.
x Description of the partly-completed machine uninstallation.
Chapter 5
Maintenance and
demolition
x Description of the verification and control procedures of the parts and
components of the partly-completed machine (in particular, of the parts
most subject to wear);
x description of the procedures that allow the designated personnel to
clean the partly-completed machine;
x presentation of the instructions for disassembling, demolishing and
disposing of the partly-completed machine.
Chapter 6
Options
x Description of the options available for installation on the partly-
completed machine.
Chapter 7
Troubleshooting x List of possible malfunctions of the partly-completed machine and the
related solutions.
Chapter 8
Annexes x Indications on the:
x Technical datasheets of the possible versions of the partly-completed
machine;
x refrigeration diagram;
x documentation of components fitted to the partly-completed machine.
x declaration of incorporation
Table 1 – Structure of the assembly instructions