manualshive.com logo in svg

Rivacold CO2NNEXT, Руководство по сборке

Поделиться
Скачать
Rivacold CO2NNEXT Скачать руководство пользователя страница 7

CO

2

NNEXT 

rev.01 

EN

65 / 293

 

 

 

1.4.

 

Conventions and definitions 

The assembly instructions for the partly-completed machine were divided into chapters to enable, for each 
life phase of the partly-completely machine (transportation, installation, maintenance and decommissioning) 
readily available information necessary for the user of the partly-completed machine. 
The entire documentation relating to the partly-completed machine was prepared by developing the topics 
indicated by the Machinery Directive (2006/42/EC), by the PED Directive (2014/68 EU) and by the current 
safety regulations. 
The configuration of certain elements or devices described or represented in the documents may differ from 
that composing the partly-completed machine in the specific set-up created according to particular 
requirements or safety regulations; in this case, certain descriptions, references or best practices may have a 
generic character while retaining their effectiveness. 
Dimensional drawings and photographs are provided as an example as a reference for easier understanding 
of the text. 

 

1.4.1.

 

Definitions 

PARTLY-COMPLETED MACHINE: it is the term used in these Assembly Instructions to indicate the CO

2

NNEXT. 

P.P.E.: it is the acronym for Personal Protective Equipment. 
DANGEROUS ZONE: Any area inside or near the machine in which the presence of an exposed person is a risk 
to the health and safety of the person. 
USER:  Any person (entrepreneur/company) who adequately uses the partly-completed machine or who 
entrusts its related use or operations to instructed persons. 
EXPOSED PERSON: Any person wholly or partially present in a dangerous zone or near such areas. 
MECHANICAL MAINTENANCE TECHNICIAN: Qualified technician allowed to work on any mechanical 
component, to carry out the necessary adjustments, repairs and maintenance intervention. 
The mechanical maintenance operator is not permitted to carry out interventions on powered electrical 
plants. 
ELECTRICAL MAINTENANCE TECHNICIAN: a qualified technician in charge of electrical works (adjustment, 
maintenance, repairs) and, when necessary, works inside powered electric cabinets and the junction boxes. 
HANDLING PERSONNEL: Qualified personnel who carry out the tasks of handling the partly-completed 
machine or the materials used if the operation requires the use of lifting devices. 
MANUFACTURER’S TECHNICIAN: Qualified technician provided by the manufacturer of the partly-completed 
machine to carry out operations of a complex nature in particular situations or, in any case, when agreed 
with the user. 

 

1.4.2.

 

Personal protection equipment and rules of conduct 

For each of the operations described in these instructions are indicated the means of protection that 
personnel are required to use and the rules of conduct that allow protection of the safety of the operators 
themselves. 

Содержание CO2NNEXT




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды