CO
2
NNEXT
rev.01
EN
80 / 293
Regardless of the configuration, the partly-completed machine is always supplied without the air evaporators
so it is not able to perform the function for which it is created without the evaporating unit. As a
consequence, it is a partly-completed machine, as defined by Machinery Directive 2006/42/CE. In order to
define the refrigeration cycle envisaged, the purchaser has to insert it in a complete refrigeration circuit.
It can however be placed on the market as it is, accompanied by the related declaration of incorporation of
the manufacturer and the corresponding instructions for assembly, which enable its simple integration in the
final machine (which must then be CE-marked, pursuant to the directives applicable to it, by the integrating
entity).
On the right front panel of the partly-completed machine is the electrical panel on which the main switch
and the display are installed.
An example is shown below. For further information, refer to the wiring diagram and the enclosed
documentation.
1.
Main switch
3.
Liquid indicator
2.
Display*
* For the description of the display, see paragraph 4.5. "Preparation for start-up" in the dedicated section in
this manual.
