Riso GOCCOPRO 100, Руководство пользователя

Страница: 43 / 94

2
How to Produce an Imaged Screen
41
When you select <MANUAL> (arbitrary margin setting):
Enter the s ize s of the margin s on the Top s ide and
the End s ide in the following s tep s .
1
Press the <MANUAL> Key to select the
side (Top side/End side) where the margin
size is to be set.
The c u rrent margin s ize i s s hown in the Di s play.
2
1) Enter arbitrary values of margin size using
the 0 to 9 Keys.
The c u rrently entered n u mber blink s .
2) Press the <ENTER> Key to determine the
margin size.
The c u rrently entered n u mber i s lit.
4
Press the <START> Key.
Screen making i s s tarted.
The imaged s creen i s ejected from the Imaged
Screen O u tlet.
The s ize s of the margin s on the Top s ide
and the End s ide are s et to 2.4" / 60 mm
by factory defa u lt.
• To s et the margin s ize s of both the Top
and End s ide s , repeat s tep s 1 and 2.
• Yo u can check the u nit of the entered
n u mber with the <inch / mm> Indicator.
• The s et margin s ize i s s tored u ntil the
POWER Switch of the machine i s
t u rned off.
<MANUAL> Key
Display
2) <ENTER> Key
1) 0 to 9 Keys
• To s top s creen making, pre ss and hold the
<STOP> Key (1 s econd or more) and then
relea s ed. The s creen making i s s topped, and
the c u t s creen i s ejected from the Imaged
Screen O u tlet. However, if the <STOP> Key i s
pre ss ed while the margin on the Top s ide i s
being tran s ported, operation of the machine
will be s topped and "A- 3 4" will appear on the
di s play. Rewind the s creen ma s ter, and s et it
again.
"When an Error Indicator Lights" on
page 62
• To delete the original data in the s creen-mak-
ing q u e u e, pre ss the <ONLINE> Key to s witch
to offline mode.
• To reprod u ce a s creen, pre ss the <STOR-
AGE> Key. The data of the reprod u ced s creen
can be repeatedly us ed a s many time s a s yo u
de s ire u ntil yo u perform the following opera-
tion.
• Receive a new original data.
• T u rn off the machine.
• Be sure not to bend the imaged screen
when taking it out.
• If any type of the Frames 1-5 is selected
and the length of the frame is smaller than
the sum of the "minimum value of the Top
side margin", "length of the original data",
and "minimum value of the End side mar-
gin size", a "LENGTH" error is displayed.
Select a frame with a larger size, or select
"MINIMUM" or "MANUAL".
"When an Error Indicator Lights" on
page 62
<START> Key