Ridder MotorControl RMC400, Руководство по эксплуатации продукта

Страница: 4 / 36

2. SAFETY, PRECAUTIONS AND SYMBOLS
2.1 Signal words, instructions and warnings
Signal words (ISO 3864-2)
This product manual contains safety instructions with different signal words. The list that follows
gives the risk levels and possible effects of each signal word.
Instructions and warnings on the product
Read the product manual to fully know all product properties,
before it is used or work starts!
Ê
It is not permitted to use high-pressure cleaners (and related
cleaning agents)! Use a soft brush with a small quantity of water
without cleaning agents.
Warning - Electrical voltage
2.2 Precautions and safety instructions
Precautions
GENERAL
A system can be dangerous. Safety precautions and instructions are important.
• If these precautions cannot be obeyed, then use warnings.
• The responsibility for precautions and warnings lies with the installer of the system. Refer to the,
local or national, laws and regulations of the country if a certification (mark) is necessary.
• Parts of the electrical or electronic installations are connected to dangerous electrical voltages.
Work without professional competence or not obeyed warning instructions could cause injury
and/or material damage.
Suggestion to perform an operation more effective.
May result in damage or problems if an action is performed
incorrectly.
May result in minor injury if the hazard is not avoided.
Significant injury, possible death, if the hazard is not avoided.
Severe injury and possible death if the hazard is not avoided.
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
ridder.com
4
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
ridder.com
5