84
Rigel-PJ1nx Training
Slide 84
Updating the System Firmware
Check the IP address of the projector.
In the following example, the IP address is xxx.xxx.xxx.xxx
Open a browser, and input the following:
http://xxx.xxx.xxx.xxx/upload.html
Click [Browse].
Select the file to be overwritten, then click [Update], then [OK].
‘File written successfully’ will be displayed after the update is finished.
Check the history information that appears on the screen.
If you have more firmware files to update, select another file and click [Update].
Click [Reboot] when you have finished.
Do not turn the power off or disconnect the LAN cable before rebooting.
The detailed procedure is in the System Maintenance - Firmware Update section
of the service manual.