77
Rigel-PJ1nx Training
Slide 77
Writing Data to New Boards
Data Writing After Replacing the Main Board - 11
Click ‘Adjust Start’. Then click ‘Data’.
If data reading from the old main board failed, then skip the rest of this
slide. Go to the next slide.
Select ‘All’, then click ‘Write’.
You will be asked to input a file name. Select the file that has the data from
the old main board.
When “Please Power Off (Standby state).” appears on the computer, make
sure that the projector power is in the standby state, then click OK.
Click ‘OK’ when ‘It completed’ appears.
Click ‘Adjust End’.
Note: If you now wish to do the same work on another projector, you must
still click ‘Adjust End’, or there will be an error.
In normal standby mode, the Power indicator is orange and the Status indicator
is green.
In power-saving standby mode, the Power indicator is red and the Status
indicator is off.
If the projector is not in standby mode, press the Power button one time.
